Discussion:
ROWE AMI CD 100-C Display Power Issue
(too old to reply)
MARISSA DOVE
2021-03-15 21:55:07 UTC
Permalink
I recently purchased a ROWE AMI CD 100-C jukebox. All was working perfectly until I attempted to remove 70% of the CDs. Now, when I turn the machine back on, I have no power on the display panel, and no control over the buttons or page turner.
John Robertson
2021-03-15 22:03:15 UTC
Permalink
Post by MARISSA DOVE
I recently purchased a ROWE AMI CD 100-C jukebox. All was working perfectly until I attempted to remove 70% of the CDs. Now, when I turn the machine back on, I have no power on the display panel, and no control over the buttons or page turner.
Hi Marissa,

Make sure the front door is fully latched down. It may be that it isn't
pressing on the Service Switch witch is located on the inside of the
cabinet down about a foot or so from the hinge - the door presses
against this and allows the machine to operate normally, rather than be
in the Service position where it is waiting for the operator to do things...

If you don't have the manual I recommend getting one and it covers the
operator/service switch there.

John :-#)#
--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
MARISSA DOVE
2021-03-15 22:19:14 UTC
Permalink
Yea, it's definitely back in normal mode.

It's strange, it's almost like I blew a fuse or the power to just that one area was cut off.

Everything else is working properly.

Unfortunately, I don't have any manuals. :(
John Robertson
2021-03-15 23:27:24 UTC
Permalink
Post by MARISSA DOVE
Yea, it's definitely back in normal mode.
It's strange, it's almost like I blew a fuse or the power to just that one area was cut off.
Everything else is working properly.
Unfortunately, I don't have any manuals. :(
We make reprints of the original manuals for around $35US, and there are
two manuals for this machine - if you want to provide me with your
postal code and country I can get you a shipping quote...

John :-#)#
--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
Loading...