NSM Error FF help

[w***@gmail.com]

My NSM Satellite 200 is giving ERR. FF. When I make a selection, the carriage starts to scan but then stops and gives ERR FF. Any ideas?

[John Robertson]

Post by w***@gmail.com
My NSM Satellite 200 is giving ERR. FF. When I make a selection, the carriage starts to scan but then stops and gives ERR FF. Any ideas?

Do you have the manual? That is where I always start...

John :-#)#

[w***@gmail.com]

Post by w***@gmail.com
My NSM Satellite 200 is giving ERR. FF. When I make a selection, the carriage starts to scan but then stops and gives ERR FF. Any ideas?

I do but it not helpful with this error. Refers to either a record being stuck or the carriage off track. Neither is the problem.

[John Robertson]

Post by w***@gmail.com

Post by w***@gmail.com
My NSM Satellite 200 is giving ERR. FF. When I make a selection, the carriage starts to scan but then stops and gives ERR FF. Any ideas?

I do but it not helpful with this error. Refers to either a record being stuck or the carriage off track. Neither is the problem.

I have seen some problems caused by weak batteries. I think that machine
uses the TimeKeeper series from Dallas, which means you have to
carefully take the top off (do a search for the process) and replace the
original battery with a new one.

Otherwise I don't have any great ideas, other than running the self
tests to see that all switches/optos respond as they should.

One other thing to consider is it may be the optos are dirty, take a
clean Q-tip and rub it in the gap (dry tip). If the machine is in a
smokers home then you may have to clean the optos with lens cleaner for
cameras.

John :-#)#

[w***@gmail.com]

Post by John Robertson

Post by w***@gmail.com

Post by w***@gmail.com
My NSM Satellite 200 is giving ERR. FF. When I make a selection, the carriage starts to scan but then stops and gives ERR FF. Any ideas?

I do but it not helpful with this error. Refers to either a record being stuck or the carriage off track. Neither is the problem.

I have seen some problems caused by weak batteries. I think that machine
uses the TimeKeeper series from Dallas, which means you have to
carefully take the top off (do a search for the process) and replace the
original battery with a new one.
Otherwise I don't have any great ideas, other than running the self
tests to see that all switches/optos respond as they should.
One other thing to consider is it may be the optos are dirty, take a
clean Q-tip and rub it in the gap (dry tip). If the machine is in a
smokers home then you may have to clean the optos with lens cleaner for
cameras.
John :-#)#
--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
[phone] (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."

Well I resolved the problem for anyone else that runs into this problem. I had to replace diode r208 on the Powerboard. Once I did that the juke looks and sounds amazing!