Discussion:
ROWE AMI CD 100C ERRORE 05-63
(too old to reply)
gianpiero romano
2020-09-23 20:55:34 UTC
Permalink
GOOD EVENING EVERYONE, I WOULD LIKE A HELP FOR MY ROWE AMI CD 100C.
THE ERROR BOARD LED TURNS ON AND THE CD SPINS WITHOUT STOPPING AND CHECKING THE KEYBOARD ON THE DISPLAY IT GIVES ME ERROR 05-63 01. I APOLOGIZE IF THERE ARE SOME WRITING ERRORS BUT I AM USING THE TRANSLATOR.
THANKS TO WHO CAN HELP ME
Ken Layton
2020-09-24 15:12:26 UTC
Permalink
Post by gianpiero romano
GOOD EVENING EVERYONE, I WOULD LIKE A HELP FOR MY ROWE AMI CD 100C.
THE ERROR BOARD LED TURNS ON AND THE CD SPINS WITHOUT STOPPING AND CHECKING THE KEYBOARD ON THE DISPLAY IT GIVES ME ERROR 05-63 01. I APOLOGIZE IF THERE ARE SOME WRITING ERRORS BUT I AM USING THE TRANSLATOR.
THANKS TO WHO CAN HELP ME
Error 05-63 means the mechanism lost communication either between the mechanism control board and the cd player or between the mechanism control board and the central control computer board. Check for tarnished connectors.
gianpiero romano
2020-09-24 16:52:04 UTC
Permalink
Post by Ken Layton
Post by gianpiero romano
GOOD EVENING EVERYONE, I WOULD LIKE A HELP FOR MY ROWE AMI CD 100C.
THE ERROR BOARD LED TURNS ON AND THE CD SPINS WITHOUT STOPPING AND CHECKING THE KEYBOARD ON THE DISPLAY IT GIVES ME ERROR 05-63 01. I APOLOGIZE IF THERE ARE SOME WRITING ERRORS BUT I AM USING THE TRANSLATOR.
THANKS TO WHO CAN HELP ME
Error 05-63 means the mechanism lost communication either between the mechanism control board and the cd player or between the mechanism control board and the central control computer board. Check for tarnished connectors.
Hi thank you for the advice Ken Layton I will try to pass a flux for contacts on the connectors .... can I keep in touch with you for some more advice?
Greetings from Rome.
John Robertson
2020-09-24 17:29:48 UTC
Permalink
Post by gianpiero romano
Post by Ken Layton
Post by gianpiero romano
GOOD EVENING EVERYONE, I WOULD LIKE A HELP FOR MY ROWE AMI CD 100C.
THE ERROR BOARD LED TURNS ON AND THE CD SPINS WITHOUT STOPPING AND CHECKING THE KEYBOARD ON THE DISPLAY IT GIVES ME ERROR 05-63 01. I APOLOGIZE IF THERE ARE SOME WRITING ERRORS BUT I AM USING THE TRANSLATOR.
THANKS TO WHO CAN HELP ME
Error 05-63 means the mechanism lost communication either between the mechanism control board and the cd player or between the mechanism control board and the central control computer board. Check for tarnished connectors.
Hi thank you for the advice Ken Layton I will try to pass a flux for contacts on the connectors .... can I keep in touch with you for some more advice?
Greetings from Rome.
Hi Gianpiero,

Not sure what you mean by "I will try to pass a flux for contacts on the
connectors ". What I would recommend is that you try to polish the pins
or PCB traces for the connectors using a very mild abrasive that won't
damage the gold flashing. Also, watch out for static electricity when
polishing any PCB connectors!

John :-#)#
--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
Jay Hennigan
2020-09-27 17:35:30 UTC
Permalink
Post by John Robertson
Hi Gianpiero,
Not sure what you mean by "I will try to pass a flux for contacts on the
connectors ". What I would recommend is that you try to polish the pins
or PCB traces for the connectors using a very mild abrasive that won't
damage the gold flashing. Also, watch out for static electricity when
polishing any PCB connectors!
By mild abrasive, something like a pencil eraser. Not sandpaper and
never steel wool. Caig De-Ox-It on a paper towel or Q-tip also works well.

If by flux you mean soldering flux, not a good idea. Flux assists solder
flow, it isn't a contact cleaner or tarnish remover. Many fluxes will
damage electronics if not removed after soldering.

Loading...