Discussion:
Rockola456
(too old to reply)
Anthony Camarena
2022-11-04 05:19:08 UTC
Permalink
Tone arm starts 15seconds into song and gets stuck before song ends. Any ideas.
John Robertson
2022-11-04 06:39:11 UTC
Permalink
Post by Anthony Camarena
Tone arm starts 15seconds into song and gets stuck before song ends. Any ideas.
The manual covers the Lead-In (where the needle lands), and Cutoff (the
point it cancels playing) adjustments.

I'd start there...

John :-#)#
--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
#7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
John Robertson
2022-11-04 07:06:12 UTC
Permalink
Post by John Robertson
Post by Anthony Camarena
Tone arm starts 15seconds into song and gets stuck before song ends. Any ideas.
The manual covers the Lead-In (where the needle lands), and Cutoff (the
point it cancels playing) adjustments.
I'd start there...
John :-#)#
Oh, and make sure the tone arm is set correctly over the cam that sets
in in place on the record and returns the tone arm to the rest position
- the two pins sticking out of the bottom of the plate must straddle the
cam. If the machine was moved or someone pulled up on the tone arm
assembly it could be offset!

Again the owners manual should show the correct placement of the tone
arm assembly.

John :-#)#
--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
#7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
Loading...